21
Creating a song
Creating a song
Correcting the timing (Play Quantize)
Performances you input by striking the pads manually will inevitably have
slight timing inaccuracies. Play Quantize is a function that lets you align the
timing of the notes precisely to the beat during playback.
1
Press .
The SEQUENCE screen will appear.
2
Select the track you want to
quantize as the current track.
Use the
(up/down) to choose the
current track.
3
Press
(Track Prm).
The TRACK PARAMETER pop-up for the
current track will appear.
4
Set the Play Quantize
parameters.
(Example) To align your performance to 16th notes ...
For details on other quantize parameters, refer to Owner’s Manual p. 206.
5
Listen to the quantized
performance as described in the
procedure for Listening to the
demo song (p. 11).
The note timing will be aligned to 16th
note steps.
Parameter and setting
Result
Quantize Type= Grid
Apply grid quantization.
Grid Resolution=
(1/16)
Specifies 16th notes as the smallest unit of time into
which the quantized measure will be divided.
Grid Strength= 1~100%
Specifies the degree to which quantization will correct
the timing. With a setting of 100, the notes will be
aligned precisely to the timing intervals specified by
Grid Resolution. With a setting of 0, the note timing
will not be corrected at all. Try out various settings.
In addition to the Play
Quantize function described
here, there is also an “Edit
Quantize” (Owner’s Manual p.
227) function that directly
affects the sequence data itself,
and a “Input Quantize”
(Owner’s Manual p. 209)
function that applies
quantization while you are
recording the sequence data.
You can use “Quantize
Templates” (Owner’s Manual
p. 228) to quantize a
performance to various types
of “groove.”
QuickStart_e.book 21 ページ ２００５年４月２８日 木曜日 午後９時３５分