Roland MV-8000 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 32

Roland MV-8000 Скачать руководство пользователя страница 6

6

Preparations and concepts

Turning on the power

1

Make sure that the audio devices connected to the MV-

8000 are powered-off.

2

Set the rear panel POWER switch to the ON position.

The LCD backlight (illumination) will light, and the opening screen and the
MV-8000's system software version will be displayed.

• When you turn on the power, you may hear a sound even though the MASTER

knob is turned down; this is not a malfunction.

• While the opening screen is displayed, the MV-8000 is checking its system and

loading data required for startup. Please wait until it is ready to operate.

• To cancel loading and to create a new project, press [F5 (Create New)].

• To adjust the contrast of the display, turn the CONTRAST knob located at the right

of the LCD.

3

When start-up is complete, the SEQUENCE screen will

appear.

4

Turn on the power of your audio equipment.

5

Use the MV-8000's MASTER knob and the volume controls

of your audio equipment to adjust the volume appropriately.

After making connections
correctly as described in
Preparing your equipment
and making connections (p.
4), turn on the power using
the procedure given here. If
you fail to observe this
procedure, you risk
malfunctions or speaker
damage.

This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
power up is required before
the unit will operate normally.

The first time you start up the
MV-8000, demo playback data
will be loaded automatically.
The next time you start up, the
project and song that were
being used when you last shut-
down the system will be
loaded automatically.

QuickStart_e.book 6 ページ２００５年４月２８日　木曜日　午後９時３５分

«
...
4
5
6
7
8
...
»

Содержание MV-8000

































Отзывы:

Нет отзывов