Roland MV-8000 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 32

Roland MV-8000 Скачать руководство пользователя страница 19

19

Creating a song

Creating a song

Loop recording

Here's how you can use Loop Recording to keep layering additional pad
performances while the specified region continues to loop (i.e., plays back
repeatedly).

1

Press .

The SEQUENCE screen (

Owner’s Manual p.

203

) will appear.

2

Press .

The current time location will return to
the beginning of the song (0001-01-000).

3

Press .

The four measures starting at the
beginning of the current measure will be
set as the loop region, and the Loop screen

will be turned on (

is lit). In this

example, the loop region extends from the
beginning of the song (0001-01-000) to the
end of the fourth measure (0004-04-479).

4

Begin recording as described in
Creating a new song (p. 18).

“Loop” is a function that
repeatedly plays back the
specified region.

To change the loop region,
move the time to the measure
from which you want to loop,
and press [QUICK SET] once
again.

To change the loop length,
press [MENU] in the
SEQUENCE screen and choose
Loop, or press [SHIFT] +
[LOOP ON]. Set the Loop
Quick Set Length parameter in
the LOOP pop-up.

Try these!

Rehearsal

If you start the sequencer by pressing [PLAY] instead of pressing [REC],
your performance will not be recorded. You can use this feature to
practice your performance before actually recording it. During
rehearsal, you can press [REC] to start recording immediately.

Track Mute/Solo

If you make the track parameter
“M” light, that track will be
muted (silenced). If you make
“S” light, only that track will be
heard.

If both Mute (M) and Solo (S) are lit,
mute will take priority.

To add a MIDI track to the
song, use Add MIDI Tracks. To
add an audio track to the song,
use Add Audio Tracks. For
details, refer to Creating a
track for sequence recording
(p. 20).

To delete data that you input,
hold down [EVENT ERASE]
(while you are still in
recording mode), and hold
down the pad of the note
number you want to erase.
Events of the note number
whose pad you are holding
down will be erased from the
current track when the current
time location passes over the
event.

If you're not satisfied with
the results of the realtime-
recording performed, you
can press [UNDO] to return
to the previous state
(Owner’s Manual p. 80).

QuickStart_e.book 19 ページ２００５年４月２８日　木曜日　午後９時３５分

«
...
17
18
19
20
21
...
»

Содержание MV-8000

































Отзывы:

Нет отзывов