Roland LX-17, Руководство пользователя

Страница: 16 / 30

16
Advanced Operation
˙ Loading/Saving Piano Setups
This unit lets you load a piano setup that you’ve saved on a USB flash
drive, or save your piano setup to a USB flash drive.
MEMO
Only piano setups that were created on the unit can be loaded.
Settings that are saved as piano settings
Setting Page
Speaker volume p. 6
Headphone volume p. 6
Ambience p. 6
Headphones 3D Ambience p. 6
Brilliance p. 6
Key Touch p. 6
Hammer Response p. 6
Piano Designer settings p. 13
Master Tuning p. 18
Temperament p. 18
Temperament Key p. 18
Volume Limit p. 19
Saving Piano Settings (Piano Setup Export)
1.
Connect your USB flash drive to the USB Memory port
(p. 23).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [
K
] [
J
] buttons to select “Piano Setup Export,” and
then press the [
s
] (Enter) button.
The Piano Setup Export screen appears.
4.
Rename the piano settings.
[
K
] [
J
] buttons
Select the position at which you want to change
the character.
[–] [+] buttons Change the character.
5.
Press the [
s
] (Enter) button.
The settings are saved.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates “Executing...”
6.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Loading Piano Settings (Piano Setup Import)
1.
Connect your USB flash drive to the USB Memory port
(p. 23).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [
K
] [
J
] buttons to select “Load Piano Setup,” and
then press the [
s
] (Enter) button.
The Piano Setup Import screen appears.
4.
Use the [+] [–] buttons to select the piano settings that you
want to load.
5.
Press the [
s
] (Enter) button.
A confirmation message appears.
If you decide to cancel, press the [
u
] (Exit) button.
6.
Use the [
J
] button to select “Yes,” and then press the [
s
]
(Enter) button.
The settings are loaded.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates “Executing...”
7.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.