Roland LV-290, Руководство пользователя

Страница: 96 / 216

94
Navigating to this page:
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Set Standby
Mode> from the menu
Set Standby Mode Page
Machine Setting- Set Standby Mode Page
The Set Standby Mode page allows you to configure the laser machine automatically enter into power saving
if machine is idle for a specified time.
When entering into the Set Standby Mode function, you can use Left or Right arrow keys to scroll between
<Enable> or <Disable> the function. The Time function is to determine after how long the laser machine is idle,
it will enter in power saving automatically. The default time is 4 minutes. The Enter Standby function will turn
the machine into power saving immediately after selected.
•
Standby: Enable/ Disable
•
Time: 4-30 mins. (Default 4 mins.)
•
Enter Standby: YES/ NO
Set Standby Mode Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
 /  Directional Cycle standby mode between YES / NO
Start / Stop Back to Main Work Page
Auto Focus Initiate the auto focus function
 /  Directional Scroll between menu options
 /  Manual Focus Buttons Manually adjust the height of the work table (Z-axis)