128
Various Settings
■
Changing the Bend Range
(Pedal Setting)
The effect of smoothly raising or lowering the pitch of a
played note is called the “bender effect.”
With the KR105, you can assign the bender function to a
pedal, then apply the bender effect by depressing and
releasing the pedal.
You can also make a setting that determines how much the
pitch of the note changes when you apply the bender. The
maximum range of change in pitch is called the “bend
range.”
At Step 3 “Procedure” (p. 124), touch <Pedal Setting>.
fig.d-pedalset.eps_50
Touch <Bend Range>
to adjust the bend range
setting.
You can set this to any value within a range of 1 to 12 (in
half-tone steps, up to one octave).
■
Changing How Chords Are
Played and Specified
(Arranger Config)
This changes the settings determining how Music Styles are
played, and how the keys are pressed to specify chords.
What are the Chord Tone and Bass Tone?
When the Automatic Accompaniment is stopped, and Sync
Start (p. 43) is turned off, chords are produced when you
play in the left-hand side of the keyboard. This is called the
“chord tone,” and the root of the chord that is played at the
same time is called the “bass tone.”
At Step 3 “Procedure” (p. 124), touch <Arranger Config>.
fig.d-arrset.eps_50
Touch <
▲
><
▼
> of each item to make settings.
Parameter
Name
Value
Explanation
Accomp
Accomp
All Music Style parts
are played.
Chord&Bs
Only chord Tones,
and bass Tones are
played.
Bass Tone
OFF,
Acoustic Bs.,
A. Bass+Cymbl,
Fingered Bs.,
Picked Bass.,
Fretless Bs.,
Slap Bass1,
Organ Bass,
Synth Bass 101,
Thum Voice
Selects the bass Tone.
When set to “OFF,”
no tone is played.
Chord Tone
OFF, E.Piano 1,
E. Piano 2,
Soft E. Piano,
Hard E. Piano,
Slow Strings,
Strings,
Choir,
Doos Voice
Selects the chord
Tone. When set to
“OFF,” no tone is
played.
KR105.book Page 128 Tuesday, June 7, 2005 5:25 PM