127
Various Settings
* What is the leading bass function?
The function that sounds the lowest note of a fingered chord
as the bass tone is called “Leading Bass.” When this function
is turned on, the Bass Tone changes when chord inversions
are used. Usually the tonic of the chord you play sounds as
the bass tone.
* What is the rotary effect?
This adds a sort of spinning effect to the organ sound, similar
to the sound when a rotary speaker is used.
Changing the speed increases or decreases the speed of this
spinning effect.
❍
Functions that Can be Assigned (Pedals
Only)
NOTE
The effect may not be applied correctly when you press a pedal
if “Pedal EX1–4” is assigned to more than one pedal.
Using the “Bend Up” or “Bend Down” function during a split
performance (p. 25) changes the pitch of sounds in the right-
hand side of the keyboard. Additionally, the range in which the
pitch can change when the Bender effect is used is called the
“bend range”; refer to “Changing the Bend Range (Pedal
Setting)”.
Fade In/Out
This starts Automatic Accompaniment
with a fade-in (where the volume gets pro-
gressively louder), ends it with a fade-out
(where the volume gets progressively soft-
er), then stops.
Rotary Slow/
Fast
This switches the speed of the rotary effect*
when you perform with an organ tone.
Glide
While the pedal or Performance Pad is held
down, the pitch of the sound drops tempo-
rarily, returning to the original pitch when
the pedal or Pad is released. This can be ef-
fective for simulating the performance of
instruments like a Hawaiian guitar.
Composer
Play/Stop
Performs the same function as the [
Page
Fwd
Press the pedal or the Pad turns the nota-
tion appearing on the KR105 display to the
next page while the performance of a song
is stopped.
Page
Bwd
Press the pedal or the Pad turns the nota-
tion appearing on the KR105 display to the
preceding page while the performance of a
song is stopped.
Punch In/Out
During Punch-in Recording, this starts and
stops recording (p. 105).
Tap
Tempo
You can set the tempo according to the in-
terval at which the pedal or pad is pressed
(p. 67).
Function
Explanation
Function
Explanation
Replay
Pressing the pedal during playback of a song
stops the playback. When the pedal is
released, playback resumes from the beginning
of the measure that was playing when the ped-
al was pressed. When the pedal is pressed in
rapid succession, the playback will resume
backs up the same number of measures as the
number of times the pedal is pressed.
Upper Sos-
tenuto
The pedal functions as a sostenuto pedal
(p. 16).
Upper Soft
The pedal functions as a soft pedal (p. 16).
Lower
Damper
Applies a damper pedal effect to the sounds in
the left-hand side of the keyboard during a split
performance.
Bend Up
This raises the pitch of notes you play on the
keyboard.
Bend Down
This lowers the pitch of notes you play on the
keyboard.
Pedal EX1
When the pedal is pressed during a layer per-
formance, the Tone volume changes between
two levels, depending on how firmly the pedal
is pressed.
Pressing the pedal with “Pedal EX1” selected
increases the Layer Tone volume. The Layer
Tone is played at a fixed volume, regardless of
how forcefully the keys are played.
Pedal EX2
Pressing the pedal with “Pedal EX2” selected
increases the Layer Tone volume.The Layer
Tone is played at a fixed volume, regardless of
how forcefully the keys are played.
Pedal EX3
Pressing the pedal with “Pedal EX3” selected
increases the Layer Tone volume, while the
volume of the left-hand Tone is decreased. The
Layer Tone is played at a fixed volume, regard-
less of how forcefully the keys are played.
Pedal EX4
Pressing the pedal with “Pedal EX4” selected
increases the Layer Tone volume, while the
volume of the right-hand Tone is decreased.
KR105.book Page 127 Tuesday, June 7, 2005 5:25 PM
