9
Patch Mode
Parameter
Value/Explanation
Cutoff V-Curve
Selects one of the following seven curves that determine how keyboard
playing dynamics (velocity) influence the cutoff frequency.
Set this to “FIXED” if you don’t want the Cutoff frequency to be affected by
the keyboard velocity.
FIXED, 1–7
Cutoff V-Sens
Use this parameter when changing the cutoff frequency to be applied as a
result of changes in playing velocity. If you want strongly played notes to
raise the cutoff frequency, set this parameter to positive (+) settings. If you
want strongly played notes to lower the cutoff frequency, use negative (-)
settings.
MEMO
To edit the overall patch while preserving the relative differences in the
Cutoff V-Sens values set for each tone, set the Velocity Sens Offset (p. 5).
However, this setting is shared by the Level V-Sens (p. 10).
-63–+63
Resonance V-Sens
This allows keyboard velocity to modify the amount of Resonance. If you
want strongly played notes to have a greater Resonance effect, set this
parameter to positive (+) settings. If you want strongly played notes to
have less Resonance, use negative (-) settings.
-63–+63
TVF ENV
Parameter
Value/Explanation
TVF Env Depth
Specifies the depth of the TVF envelope. Higher settings will cause the TVF
envelope to produce greater change. Negative (-) settings will invert the
shape of the envelope.
-63–+63
TVF Env V-Curve
Selects one of the following 7 curves that will determine how keyboard
playing dynamics will affect the TVF envelope. Set this to “FIXED” if you
don’t want the TVF Envelope to be affected by the keyboard velocity.
FIXED, 1–7
TVF Env V-Sens
Specifies how keyboard playing dynamics will affect the depth of the
TVF envelope. Positive (+) settings will cause the TVF envelope to have a
greater effect for strongly played notes, and negative (-) settings will cause
the effect to be less.
-63–+63
TVF Env T1 V-Sens
This allows keyboard dynamics to affect the Time 1 of the TVF envelope.
If you want Time 1 to be speeded up for strongly played notes, set this
parameter to a positive (+) value. If you want it to be slowed down, set this
to a negative (-) value.
-63–+63
TVF Env T4 V-Sens
The parameter to use when you want key release speed to control the
Time 4 value of the TVF envelope. If you want Time 4 to be speeded up
for quickly released notes, set this parameter to a positive (+) value. If you
want it to be slowed down, set this to a negative (-) value.
-63–+63
TVF Env Time
Keyfollow
Use this setting if you want the TVA envelope times (Time 2–Time 4) to
be affected by the keyboard location. Based on the TVF envelope times
for the C4 key (center C), positive (+) settings will cause notes higher
than C4 to have increasingly shorter times, and negative (-) settings will
cause them to have increasingly longer times. Larger settings will produce
greater change.
-100–+100
Time
Key
TVF Env Time 1–4
Specify the TVF envelope times (Time 1–Time 4). Higher settings will
lengthen the time until the next cutoff frequency level is reached. (For
example, Time 2 is the time over which Level 1 will change to Level 2.)
0–127
TVF Env Level 0–4
Specify the TVF envelope levels (Level 0–Level 4). These settings specify
how the cutoff frequency will change at each point, relative to the
standard cutoff frequency (the cutoff frequency value specified in the TVF
screen).
0–127
Note on
Note off
Time
Cutoff
Frequency
T: Time
L: Level
2
