Roland JEWELA JWX-10, Руководство пользователя

Страница: 56 / 64

Chapter 5 Appendix 54
5-4 Specifications
Main Unit Specification
Acceptable material
X, Y, and Z operation strokes
Maximum angle of rotation
Distance from spindle tip to work
plate
Work plate size
Cutting area
Dimensions of workpieces
installable on the rotary axis unit
Loadable workpiece weight
XYZ-axis motor
Control methods
Feed rate
Software resolution
Mechanical resolution
Clamping method
Rotary-axis tilt angle
Spindle motor
Spindle rotation
Tool chuck
Interface
Power supply
Power consumption
Acoustic noise level
Dimensions
Weight
Packed dimensions
Packed weight
Operation temperature
Operation humidity
Accessories
JWX-10
Resins such as chemical wood and modeling wax(metal not supported)
Rotary axis unit uninstalled : 140 (X) x 105 (Y) x 105 (Z) mm (5-1/2 (X) x 4-1/8
(Y) x 4-1/8 (Z) in.)
Rotary axis unit installed : 140 (X) x 70.9 (Y) x 60 (Z) mm (5-1/2 (X) x 2-3/4 (Y)
x 2-3/8 (Z) in.)
±
18x10 5 ˚ (
±
5000 rotations)
Using work plate large : Maximum 126 mm (4-15/16 in.)
Using work plate small : Maximum 40.5 mm (1-5/8 in.)
Work plate large : 140 (W) x 105 (D) mm (5-1/2 (W) x 4-1/8 (D) in.)
Work plate small : 65 (W) x 65 (D) mm (2-9/16 (W) x 2-9/16 (D) in.)
Diameter : Maximum 85 mm (3-3/8 in.)
Length : Maximum 50 mm (1-15/16 in.)
Internal circle : 15 to 23 mm (9/16 to 7/8 in.)
Using rotary axis unit : 0.5 Kg (1.1 lb) (Maximum workpiece moment of inertia
6x10
-4 kgm 2 )
Using work plate large : 4.0 Kg (8.8 lb)
Using work plate small : 0.7 Kg (1.5 lb)
Stepping motor
4-axis control (3-axis simultaneous control)
XY-axis : 0.1 to 50 mm/sec. (0.0039 to 1.9 in./s)
Z-axis : 0.1 to 30 mm/sec. (0.0039 to 1.1 in./s)
A-axis : 11.79 rpm
0.01 mm/step (0.00039 in./step)
XYZ-axis : 0.002 mm/step (0.0001 mm/step)
A-axis : 0.0225 deg.
Specialized ring-cutting tool
0 deg. to 90 deg. (in increments of 15 deg.)
DC brushless motor, Maximum 100W
6000 to 20000 rpm
Cutter holder (4.36 mm) and collet
USB connector, sensor connector, rotary axis unit connector, expansion con-
nector
AC100 to 240
±
10 %, 50/60 Hz
2.1 A
Approx. 210W
No-load operation : 60 dB (A) or less, standby : 40 dB (A) or less (According to
ISO7779)
440 (W) x 517 (D) x 554 (H) mm (17-3/8 (W) x 20-3/8 (D) x 21-7/8 (H) in.)
40 Kg (88.2 lb)
620 (W) x 710 (D) x 755 (H) mm (24-1/2 (W) x 28 (D) x 29-3/4 (H) in.)
50 Kg (111 lb)
5 to 40˚C (41 to 104˚F)
35 to 80 % (no condensation)
Power cord, collet, cutter, sensor cable, chucking knob, work plate (large), mount-
ing screws for the large work plate, hexagonal wrenches, hexagonal screw driv-
ers, spanners, Roland Software Package CD-ROM, MODELA Player4 CD-ROM,
user's manual, Roland Software Package installation and setup guide, MODELA
Player4 installation and setup guide
Voltage and frequency
Required power capacity