background image

3

Used for instructions intended to alert the user to the risk of death or severe
injury should the unit be used improperly.

About 

WARNING and 

CAUTION Notices

Used for instructions intended to alert the user to the risk of injury or material
damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with re-

spect to the home and all its furnishings, as well to domestic animals or pets.

WARNING

CAUTION

About the Symbols

The 

 symbol alerts the user to important instructions or warnings.  The specific meaning of

the symbol is determined by the design contained within the triangle.  The symbol at left means
"danger of electrocution."

The 

 symbol alerts the user to items that must never be carried out (are forbidden).  The

specific thing that must not be done is indicated by the design contained within the circle.  The
symbol at left means the unit must never be disassembled.

The 

 symbol alerts the user to things that must be carried out.  The specific thing that must be

done is indicated by the design contained within the circle.  The symbol at left means the power-
cord plug must be unplugged from the outlet.

 To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property.
Points which must be observed to prevent such injury or damage are described as follows.

Содержание JEWELA JWX-10

































































Отзывы:

Похожие инструкции для JEWELA JWX-10