Roland JEWELA JWX-10, Руководство пользователя

Страница: 34 / 64

3-2 Getting Ready for Cutting Using the Rotary Axis
Chapter 3 Operation 32
Cutter Installation and the Cutting-start Location Setting
CAUTION Do not touch the tip of the blade with your fingers.
Doing so may result in injury.
1.
Install the sensor.
➊
Close the front cover.
Press the VIEW button to make the VIEW light come on.
The table moves back toward you.
➋
Wait until operation has stopped completely, then open the front cover.
➌
Run the sensor cable around behind the ma-
chine to the top of the table.
Connect the sensor cable to the sensor con-
nector.
2.
Install the cutter.
➊
Detach the cutter holder from the cutter.
➋
While using a spanner (large) to hold the spindle immobile,
tighten the cutter holder sufficiently.
The cutter holder is reverse-threaded (that is, you turn it counter-
clockwise to tighten it). Be careful to turn it in the correct direc-
tion.
Cutter holder
Spanner (large)
Sensor cable
Cutter holder
Hexagonal screw driver
(small)