Roland JEWELA JWX-10 Скачать руководство пользователя

Страница: 27 / 64

2-2 Installation

Chapter 2 Preparation

Connecting the Power Cord

WARNING

Do not use with any electrical power supply that does not meet the ratings dis-
played on the unit.

Use with any other power supply may lead to fire or electrocution.

WARNING

Ground the unit with the ground wire.

Failure to do so may result in risk of electrocution in the event of a mechanical problem.

CAUTION

Perform this task with all power switches left switched off.

Otherwise sudden movement of the machine may cause injury.

Important Notes on the Power Cord

WARNING

Never damage the power cord or pull it with force.

Doing so may tear the cord's insulation, causing an electrical short and resulting in electri-
cal shock, electrocution, or fire.

WARNING

Never place any object on the power cord, bend the power cord using excessive
force, or allow the power cord to become deformed.

If it becomes deformed, the deformed location may grow hot and cause fire.

WARNING

Never use the machine with the power cord bound into a bundle or roll.

If the cord is in a bundle or roll, it may grow hot and cause fire.

WARNING

Never use any power cord other than the power cord included with the machine.
Also, never use a power strip or extension cord.

The power strip or extension cord may grow hot and cause fire.

WARNING

Do not use with a damaged power cord or plug, or with a loose electrical outlet.

Doing so may lead to fire, electrical shock, or electrocution.

Connecting/disconnecting the cord

Be sure to turn off the machine before connecting/discon-
necting the power cord. Also, be sure to connect the cables
securely so that they will not accidentally disconnect while
the machine is operating.

Power outlet

Power cord

Machine

Содержание JEWELA JWX-10

































































Результаты поиска

Содержание JEWELA JWX-10

Отзывы:

Похожие инструкции для JEWELA JWX-10

Бренды по названию

Популярные бренды

Roland JEWELA JWX-10, Руководство пользователя

Результаты поиска

Содержание JEWELA JWX-10

Отзывы:

Похожие инструкции для JEWELA JWX-10

Бренды по названию

Популярные бренды