Roland J-6, Руководство пользователя

Страница: 18 / 33

Functions and Menus
18
Using the menus
1. Hold down the [SHIFT] button and press the [B (MENU)] button.
2. Use the [TEMPO/VALUE] knob to select the item, and then press the [D (ENTER)] button.
The value is displayed.
3. Turn the [TEMPO/VALUE] knob to set the value.
4. Press the [C (EXIT)] button to return to the list of menus (step 2).
5. When you are finished making the settings, press the [C (EXIT)] button again.
List of menus
This is a list of menus that you can execute using the [SHIFT] + [B (MENU)] button combination.
Item Value Explanation
vOL
(Volume) (*1)
0
–
127
Sets the pattern’s volume.
trAn
(Transpose) (*1)
-12
–
12
Transposes the sounds made by the sound generator.
d.Syn
(Delay Sync) (*1)
OFF
,
On
Synchronizes the delay time to the tempo.
bEAt
(Beat) (*1)
1-4
,
1-3
,
1-2
,
1
–
8
Sets the number of beats (the step length) in one measure of the pattern.
1-4
: Sixteenth note
1-3
: Eighth-note triplet
1-2
: Eighth note
1
–
8
: Number of beats per quarter note
*
You can also switch between settings by holding down the [PATTERN] button
and turning the [TEMPO/VALUE] knob.
A.vLo
(Accent Velocity) (*1)
1
–
127
Sets the velocity of accents included in phrases.
P.chg
(Pattern Change) (*1)
SñEP
,
1
–
8
Sets the timing for changing the pattern (at the end of a step, or after a certain
number of beats).
S.cLk
(Sync Clock) (*1)
1
,
2
,
3
,
4
,
6
,
8
,
12
,
24
Sets the number of sync clocks per beat.
CH
(MIDI Channel)
1
–
16
Specifies the MIDI transmit/receive channel.