Roland GT-8 Скачать руководство пользователя страница 15

Страница: 15 / 108

Chapter 1 Playing Sounds

Chapter

Press [EXIT] to return to the Play screen.

Turning Off the Power

Before turning off the power, confirm the following.

• Is the volume on the GT-8, your amp, and all other

connected devices turned down to the minimum level?

Turn off the power to any external effects processors,
then to the guitar amp (power amp) and other devices.

Turn the GT-8’s power off.

Value

Explanation

JC-120

Use this setting when connecting to Ro-
land’s JC-120 guitar amp.

SMALL AMP

Use this setting when connecting to small
guitar amp.

COMBO AMP

Use this setting when connecting to the
guitar input of a combo amp other than
the JC-120 guitar amp (where the amp
and speaker or speakers are combined in
a single unit).

* Depending on you guitar amp, you may be able to obtain good

results with the “JC-120” setting.

STACK AMP

Use this setting when connecting to the
guitar input of a stack-type guitar amp
(where the amp and speaker or speakers
are separated).

JC-120 Return

Use this setting when connecting to RE-
TURN of a JC-120.

COMBO Return

Use this setting when connecting to RE-
TURN with a combo amp.

STACK Return

Use this setting when connecting to RE-
TURN of a stack amp or rack mounted
power amp.

LINE/PHONES

Use this setting when using headphones
or when connecting to a multi-track re-
corder for recording.

* When using the speaker simulator, set this to LINE/PHONES.

Guitar Tuning

You can use the GT-8’s built-in “tuner function” to tune
your guitar.

For instructions on using this function, refer to “Tuning
the Guitar” (p. 76).

GT-8_e.book 15 ページ２００７年６月２９日　金曜日　午後３時５５分

Содержание GT-8













































































































Результаты поиска

Содержание GT-8

Отзывы:

Похожие инструкции для GT-8

Бренды по названию

Популярные бренды

Roland GT-8, Руководство пользователя

Результаты поиска

Содержание GT-8

Отзывы:

Похожие инструкции для GT-8

Бренды по названию

Популярные бренды