Roland FP-4, Руководство пользователя

Страница: 85 / 140

85
Settings
fig.d-SndCtrl.eps
4.
Use the [-] [+] buttons to change the setting.
If you’ve connected an external device to the Output jacks and
want to listen to the sound from it, the sound from the external
device may not be loud enough even if you’ve turned the FP-
4’s volume knob to the maximum position. In such cases, you
can adjust the master gain setting as follows.
Adjusting the master gain will also affect the volume of the
internal speakers and headphones.
The sound may distort if you increase the volume
excessively.
1.
Press the [Function] button.
2.
Press the [Reverb] button.
3.
Hold down the [Reverb] button and use the [-] [+]
buttons to get “MAS” to appear in the display.
fig.d-Mas.eps
4.
Use the [-] [+] buttons to change the setting.
You can make fine, detailed changes to the equalizer settings.
Before you make detailed adjustments to the equalizer
settings, select the equalizer type that you want to edit (p. 43).
1.
Press the [Function] button.
2.
Press the [Equalizer] button.
3.
Hold down the [Equalizer] button, and press
the [-] or [+] button to select item.
4.
Use the [-] [+] buttons to change the setting.
Setting Description
When you turn on the power, the [Equalizer]
button will be on, and the Type 1 Equalizer
setting will be selected.
When you turn on the power, the [Equalizer]
button will be on, and the Type 2 Equalizer
setting will be selected.
When you turn on the power, the [Equalizer]
button will be on, and the Type 3 Equalizer
setting will be selected.
When you turn on the power, the [Equalizer]
button will be on, and the Type 4 Equalizer
setting will be selected.
When you turn on the power, the [Equalizer]
button will be off.
Adjusting the Volume (Master Gain)
Setting
-10–10
NOTE
Equalizer Settings
Changing the Equalizer Settings
Indication Setting Description
(Low Gain)
-12–12 (dB)
Adjusts the level of the low-
frequency range.
(Low Freq)
100, 200,
400 (Hz)
Frequency point in the low-
frequency range.
Generally, this changes the
level at and below this
frequency.
(Low Mid
Gain)
-12–12 (dB)
Adjusts the level of the low-
frequency range to
midrange.
(Low Mid
Freq)
200, 250,
315, 400,
500, 630,
800 (Hz),
1.00, 1.25,
1.60, 2.00,
2.50, 3.15,
4.00, 5.00,
6.30, 8.00
(KHz)
Frequency point in the low-
frequency range to
midrange. This changes the
level of the specified
bandwidth centered on this
frequency.
(Low Mid Q)
0.5, 1.0,
2.0, 4.0, 8.0
Changes the bandwidth of
the low-frequency range to
midrange. The bandwidth
affected by the controls
narrows as the value
increases.
FP-4-e.book 85 ページ ２００７年５月２４日 木曜日 午後７時１０分