manualshive.com logo in svg

Roland Fantom-X6, Руководство пользователя

Roland Fantom-X6 - высококачественная рабочая станция с мощными функциями. Владельческое руководство доступно для загрузки бесплатно на manualshive.com. Этот мануал поможет вам раскрыть все возможности инструмента и создать уникальные музыкальные произведения. Не упустите шанс скачать свой экземпляр сейчас!

Поделиться
Скачать
background image

 

252

Troubleshooting

 

Song data does not play back correctly

Check the following points.

• Has the Receive General MIDI/General MIDI 2 System On 

Switch been turned ON?

Set the Rx GM System ON/Rx GM2 System ON parameter 
(SYSTEM/MIDI) to “ON” (p. 231).

• Are you trying to start playback from midway through the 

song?

The beginning of a GM score song contains a General MIDI/
General MIDI 2 System On message. In some cases, a GM Score 
cannot be played back correctly unless this message is received.

• Are you trying to play song data designed for the GS Format?

When the Fantom-X receives a GS Reset message, the Fantom-X 
is enabled for the GS format. This permits playback of music 
data bearing the GS logo (GS music data). However, data 
created exclusively for the Sound Canvas Series may not play 
back properly on the Fantom-X.

After recording, the song does not sound when I play it back.

Have the tracks been muted?

Defeat muting (p. 107).

The tempo is different than the last time I played back the song.

If a song is played back after the tempo is changed, then the 

new tempo is not saved unless the song is saved to the user 
memory or memory card. Conversely, the previous tempo will 
be erased when you save the song. When saving songs, 
carefully check the current tempo.

Locate Positions set in song have disappeared.

Check the following points.

• Was the disk saved in a format other than MRC-Pro format 

(SMF 0 or 1)? Locate positions will be saved with the song data 
only when saving in MRC-Pro format.

• Are you using Quick Play? In order to use locate positions, the 

song must be loaded into the Fantom-X.

Sound Device Tones Are Switched Arbitrarily

Use the Microscope (p. 192) to check the following points.

• Has an unneeded program change been input? Or are there 

duplicate program changes?

• Were any mistakes made in setting the data MIDI channels 

when Program Change messages were input?

Data supposed to be present does not appear in microscope.

Check the following points.

• Are the wrong tracks selected?

• In View Select (p. 194), is any data set not to be displayed?

After using a MIDI sequencer to play a song, sounds stopped 

playing, and no sound is played even when Program Changes 
are sent.

It could be that a Bank Select in the song data that is not 

specified by the Fantom-X was encountered in the song. No 
sound is played if the tone group is not one designated by the 
Fantom-X with Bank Select MSB/LSB. Note that if you omit the 
Bank Select, and send only the Program Change, the tone in the 
currently selected group that has the specified Program Change 
number will play. Try reselecting the tone using the panel 
controls. Furthermore, when selecting tones from an external 
MIDI device, be sure to send the Bank Select MSB/LSB and the 
Program Change as a single set for reliable reproduction. First 
sending the MSB and LSB (the order in which these are sent 
does not matter), followed by the Program Change.

 

For more about the relationship between the Bank Select MSB/
LSB and corresponding tone groups, refer to 

 

<Bank Select and 

Program Change Correspondence Chart>

 

 (p. 330).

In some cases, you may be unable to hear any sound after 
playing the last song that was faded-out. This may be because 
the volume has been lowered by volume messages or 
expression messages. Check the value of these messages, and 
set them to appropriate values.

Performances are sluggish, or have interruptions.

Problems of sluggish and interrupted performances can crop up 

very easily when the sequencer or sound generator used for the 
performance has to handle heavy data loads.

Main causes and possible corrective measures are considered 
below.

• Are more than 128 voices playing simultaneously?

Reduce the number of voices. The composition of Fantom-X 
Patches is such that up to eight Waves may be used for one 
Patch. When using such Patches, even though only one sound 
may be heard, it is actually eight sounds that are being played 
simultaneously. In addition, with certain sounds like 
continuous sounds with long releases, even though the actual 
sound may not be audible to you, processing for playing the 
sound is still underway, so in these cases as well, the 
performance data can differ from the actual number of voices 
being played.

 

In the Part Information window you can check the number of 
notes for which sound is actually being processed (p. 106).

• Are you using a Patch that uses a lot of LFO?

Try changing to a different Patch. LFO processing invariably 
places a big load on the machine, so heavy use of the LFO slows 
down processing for the Fantom-X overall, which can end up 
having affecting the expression of sounds themselves.

 

Issues Related to Sequencer

Fantom-X678_r_e.book 252 ページ ２００５年５月１２日　木曜日　午後４時４０分

Содержание Fantom-X6





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fantom-X6

Logitech diNovo Edge Specifications preview
diNovo Edge
Бренд: Logitech Страницы: 2
Deltaco TB-115 User Manual preview
TB-115
Бренд: Deltaco Страницы: 8
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Бренд: iDataLink Страницы: 6
Tracer HellWay X Instructions For Use Manual preview
HellWay X
Бренд: Tracer Страницы: 12
Casio Privia PX-200 Implementation Manual preview
Privia PX-200
Бренд: Casio Страницы: 55
Razer RZ03-04500200-R3U1 Manual preview
RZ03-04500200-R3U1
Бренд: Razer Страницы: 25
Kensington KP400 Quick Start Manual preview
KP400
Бренд: Kensington Страницы: 6
Kensington Comfort Type Quick Start Manual preview
Comfort Type
Бренд: Kensington Страницы: 11
Razer BlackWidow Tournament Edition Chroma V2 Master Manual preview
BlackWidow Tournament Edition Chroma V2
Бренд: Razer Страницы: 41
Xinmeng XM-RF87 User Manual preview
XM-RF87
Бренд: Xinmeng Страницы: 3
MISTEL Barocco MD600 Instruction Manual preview
Barocco MD600
Бренд: MISTEL Страницы: 67
Dometic MagicWatch MWE7006 Programming Instructions Manual preview
MagicWatch MWE7006
Бренд: Dometic Страницы: 240
Franklin DBE-118 User Manual preview
DBE-118
Бренд: Franklin Страницы: 29
Franklin DBE-1490 User Manual preview
DBE-1490
Бренд: Franklin Страницы: 79
Franklin Collins DMQ-1870 User Manual preview
Collins DMQ-1870
Бренд: Franklin Страницы: 97
Toyota Dynamic Laser Cruise Control System Quick Training Manual preview
Dynamic Laser Cruise Control System
Бренд: Toyota Страницы: 22
Trust 370B Quick Start Manual preview
370B
Бренд: Trust Страницы: 15
Trust 360B Instruction Manual preview
360B
Бренд: Trust Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды