Roland FANTOM Series, Справочное руководство

Страница: 94 / 132

94
Recording a Pattern
Moving Performance Data Forward or Backward
(SHIFT CLOCK)
This function moves the timing of performance data in the
specified region forward or backward in units of ticks . By slightly
moving the performance data you can give the performance a
“rushing” or “dragging” feel .
If the Shift Clock function would cause data to be moved
beyond the beginning of the song, such data is moved to the
beginning of the song .
Parameter Value Explanation
TARGET
LOOP
Changes apply to the region specified in LOOP
SETTING (p . 82) .
PATTERN Changes apply to the selected pattern .
Event
Selects the performance data that is moved .
All
All performance data
Note Note messages
Control Change Control change messages
Pitch Bend
Pitch bend messages
Poly Aftertouch Polyphonic aftertouch messages
Channel
Aftertouch
Channel aftertouch messages
BIAS [E1]
knob
-127–127
Specifies the number of ticks by which the data is
shifted .
Importing SMF as a Pattern
(IMPORT)
Here’s how SMF data can be imported as a pattern . The
imported SMF data can be handled as a pattern in the PATTERN
screen .
MEMO
In advance, copy an SMF file from your computer to the desired folder of a
USB flash drive .
1.
In the PTN UTILITY screen, select [E5] IMPORT.
The SMF IMPORT screen appears .
The import-destination can be a location that already contains a
pattern . In this case, the original pattern is overwritten .
2.
Select the SMF file that you want to import.
The selects file is highlighted . You can use the following
operations to select the file .
Operation Explanation
Touching a file name in
the screen
Directly selects the file that you touched .
[E1] knob
[
H
] button [
I
] button
Scroll up/down to select a file .
[ENTER] button
Expands the contents of a folder . Press once again
to hide the expanded contents .
[
J
] button Expands the contents of a folder .
[ K ] button Hides the expanded contents .
[EXIT] button Returns to the previous screen .
3.
Select [E6] IMPORT.
The SMF IMPORT screen appears .
Menu Explanation
Start [E1] knob
Specifies the starting measure of the SMF to be
imported .
Length [E2] knob
Specifies the number of measures of the SMF to be
imported .
Destination [E3] knob Specifies the import-destination track .
[E4] EDIT NAME Renames the pattern name after importing .
4.
Select [E6] OK.
The selects file is highlighted . You can use the following
operations to select the file .
If you decide to cancel, choose [E5] CANCEL .