Roland FANTOM Series Скачать руководство пользователя страница 20

Страница: 20 / 132

Getting Ready

Turning the Power On

Once everything is properly connected, be sure to follow

the procedure below to turn on their power . If you turn on

equipment in the wrong order, you risk causing malfunction or

equipment failure .

Minimize the volume of this unit.

Also completely turn down the volume of any connected

external devices .

Press the [

] switch.

The unit is turned on, and the display’s backlighting comes on .

OFF

Turn on the power to connected external

devices.

Adjust the volume of the connected external

devices.

Adjust the volume of this unit.

Turning the Power Off

Minimize the volume of this unit.

Also completely turn down the volume of any connected

external devices .

Turn off the power of the connected external

devices.

Press the [

] switch.

The unit is turned off .

NOTE

Before turning the unit on/off, always be sure to turn the volume down.

Even with the volume turned down, you might hear some sound when

switching the unit on/off. However, this is normal and does not indicate

a malfunction.

If you need to turn off the power completely, first turn off the unit, then

unplug the power cord from the power outlet.

Making the Power Automatically Turn

off After a Time

(Auto Off)

The power to this unit will be turned off automatically after a

predetermined amount of time has passed since it was last used

for playing music, or its buttons or controls were operated (Auto

Off function) .
If you do not want the power to be turned off automatically,

disengage the Auto Off function .

NOTE

Unsaved data is lost when the power turns off. Any data that you want

to keep must be saved in advance.

To restore power, turn the power on again.

Changing the Au

to Off Setting

Press the [MENU] button.

The MENU screen appears .

Touch <SYSTEM>.

The SYSTEM screen appears .

Touch <GENERAL>.

Select “Auto Off” and change the setting.

Parameter

Value

Explanation

Auto Off

OFF

The power will not turn off automatically .

30min

The power will automatically turn off if no

operation is performed for 30 minutes .

240min

(default)

The power will automatically turn off if no

operation is performed for 240 minutes

(four hours) .

If you want to store the auto-off setting, press

the [WRITE] button in the System screen.

When the save operation is completed, the indication

“Completed” appears .

Содержание FANTOM Series





































































































































Результаты поиска

Содержание FANTOM Series

Отзывы:

Roland FANTOM Series, Справочное руководство, Страница: 20 / 132

Результаты поиска

Содержание FANTOM Series

Отзывы: