Roland FANTOM-06 Скачать руководство пользователя страница 93

Страница: 93 / 190

Playing Pad Samples

The FANTOM can audio-record (sample) the sound of your

keyboard performance or an audio input such as an audio

device or mic. You can press the pads to record the recorded

pad samples.

Pressing Pads to Play Pad Samples

Here we explain how to use pads [1]–[16] to play sampled

sounds (the sample pad function).
Before you continue, select “SAMPLE PAD” as the pad function

as described in “Assigning Convenient Functions to the Pads

(PAD MODE)” (p. 104).

1 .

Press a pad [1]–[16].

The pad sample plays.
You can also press multiple pads simultaneously to play them.
Since an unlit pad contains no pad sample, pressing it will not

produce sound.

MEMO

The number of samples that can play back simultaneously is a

maximum of eight for mono samples and a maximum of four for

stereo samples.

Sustaining the Pad Sample Playback

(Hold)

1 .

While you hold down a pad, press the [HOLD]

button.

The pad sample continues playing even after you take your finger off
the pad. To stop the pad sample, press the pad once again.

MEMO

The hold function is available only for samples whose “GATE”

parameter is turned on (p. 99).

If the sound won’t stop?!

Rapidly press the [HOLD] button four times in succession. This

stops all sounds being played by the pads.

Switching Banks

The pad samples are assigned to four banks that each contain

16 samples. By switching banks, you can change the pad

samples that are assigned to each pad.

1 .

Press the [BANK] button.

The PAD BANK screen appears.

2 .

Press a pad [1]–[4] to select a bank.

The pad number corresponds to the bank number.
When a bank is selected, you automatically return to the

previous screen.

MEMO

You can also select a bank by directly touching an icon in the PAD

BANK screen.

Содержание FANTOM-06































































































































































































Результаты поиска

Содержание FANTOM-06

Отзывы:

Похожие инструкции для FANTOM-06

Бренды по названию

Популярные бренды

Roland FANTOM-06, Справочное руководство

Результаты поиска

Содержание FANTOM-06

Отзывы:

Похожие инструкции для FANTOM-06

Бренды по названию

Популярные бренды