Roland FANTOM-06 Скачать руководство пользователя страница 100

Страница: 100 / 190

Editing a Pad Sample

100

MEMO

As an alternative to using the [E1] [E2] knobs, you can also change

the start point and end point by directly dragging the START POINT

icon and END POINT icon in the screen to left or right. You can also

scroll the waveform display by dragging left or right on a location

other than an icon.

5 .

Edit the desired parameter.

Parameter

Value

Explanation

START POINT

000000000–

This is the playback start point.

Adjust this to skip any unwanted

portion of the waveform at the

beginning of the sample, so

that the desired sound plays

immediately.

END POINT

000001000–

This is the playback end point.

Adjust this to omit any unwanted

portion of the waveform at the

end of the sample, so that it does

not play.

* The distance between the start

point and the end point cannot

be 999 or less.

LEVEL

0–127

Adjusts the volume of the sample.

GATE

OFF, ON

Specifies whether the sample will

stop playing when you release the

pad (ON) or will continue playing

even after you release the pad

(OFF).
If this is ON, you can use the

[HOLD] button to hold the

playback.

LOOP

OFF, ON

Specifies whether the sample will

(ON) or will not (OFF) play as a

loop.

FX SW

OFF, ON

Specifies whether the effect will

(ON) or will not (OFF) be applied

to the sample.

MEMO

You can apply Master FX to the

sample.

6 .

When you have finished editing, press the [EXIT]

button to return to the SAMPLE PAD screen.

MEMO

The pad sample is saved automatically.

Using the Sample Utility Functions

In addition to “Quick Edit” and “Wave Edit”, you can use the Sample

Utility functions to do various things such as rename a pad sample

or export it as a WAV file. You can execute the Sample Utility

functions from the SAMPLE PAD screen or the WAVE EDIT screen.

The menus differ for each screen.

MEMO

The pad sample is automatically saved after each function is

executed.

Using Sample Utility functions in the SAMPLE PAD screen

The operation applies to the pad sample that is selected by the

pads.
The operations DELETE ALL and EXPORT ALL (WAV) apply to all pad

samples.

Using Sample Utility functions in the WAVE EDIT screen

The operation applies to the pad sample that is selected in the

WAVE EDIT screen.

Renaming the Pad Sample

(RENAME)

Here’s how to change the name of the pad sample.

1 .

In the SAMPLE PAD screen, touch <SAMPLE

UTILITY>. Alternatively, in the WAVE EDIT screen,

touch <SAMPLE UTILITY>.

The SAMPLE UTILITY window appears.

2 .

Touch <RENAME>.

The RENAME screen appears.

3 .

Edit the sample name as described in the

explanation for the RENAME screen (p. 16).

4 .

Select [E6] OK.

If you decide to cancel, choose [E5] CANCEL.

Содержание FANTOM-06































































































































































































Результаты поиска

Содержание FANTOM-06

Отзывы:

Бренды по названию

Популярные бренды

Roland FANTOM-06, Справочное руководство

Результаты поиска

Содержание FANTOM-06

Отзывы:

Бренды по названию

Популярные бренды