Roland Edirol M-16DX Скачать руководство пользователя страница 19

Страница: 19 / 60

Names of things and what they do

6. DIGITAL OUT Connector/Jack

These digitally output the same signal as the MAIN OUT
jacks.

Both optical and coaxial-type connectors are provided, and
both can be output simultaneously.

7. DX BUS Connector

Use the included controller cable to connect this to the DX
BUS connector of the mix controller.

Do not connect this to a computer or display.

8. POWER Switch/Indicator

Turns the power on/off. When the power is on, the indicator
will light.

fig.Box_Rear-e

9. DC IN (AC adaptor) Jack

Connect the included AC adaptor to this jack.

10. Cord Hook

Wrap the cord of the AC adaptor around this hook to prevent
the cord from being accidentally unplugged.

11. USB Connector

Use a USB cable to connect this to your computer.

➝

“Specifying the M-16DX’s sampling frequency (Sample
Freq)” (p. 45)

12. LINE IN Jacks (channels 5–16)

Channels 5–14 are balanced TRS 1/4” phone input jacks.

Channels 15 and 16 are RCA pin-type input jacks.

If you’ve connected the AUX SEND 1 jacks to an external
effects processor, input the signals output by the external
effects processor to 13L and 14R.

If you’ve connected the AUX SEND 2 jacks to an external
effects processor, input the signals output by the external
effects processor to 15L and 16R.

13. 2 TRACK OUT Jacks (L, R)

You can connect these RCA pin-type output jacks to a cassette
deck or other recording device.

14. ALT OUT Jacks (L, R)

These are balanced TRS 1/4” output jacks that can be
connected to a sampler or recorder. You can use these freely as
appropriate for your situation.

* You can also connect standard 1/4” (unbalanced) plugs.

You can use ALT OUT jacks as CONTROL ROOM outputs.

➝

“Outputting the CONTROL ROOM jacks signal from ALT
OUT jacks (CTRL to ALT)” (p. 45)

15. AUX SEND Jacks (1, 2)

These are balanced TRS 1/4” output jacks that you can
connect to an external effects processor or other device.

* You can also connect standard 1/4” (unbalanced) plugs.

* If plugs are inserted into the AUX SEND 2 jacks, the FX switch

will be turned off.

16. MAIN OUT Jacks (L, R)

These are balanced TRS 1/4” output jacks that output the final
signal produced by mixing.

Connect these jacks to your power amp or other device.

* You can also connect standard 1/4” (unbalanced) plugs.

Rear panel

Ground terminal

Содержание Edirol M-16DX





























































Результаты поиска

Содержание Edirol M-16DX

Отзывы:

Похожие инструкции для Edirol M-16DX

Бренды по названию

Популярные бренды

Roland Edirol M-16DX, Руководство пользователя

Результаты поиска

Содержание Edirol M-16DX

Отзывы:

Похожие инструкции для Edirol M-16DX

Бренды по названию

Популярные бренды