Roland Edirol M-16DX Скачать руководство пользователя страница 18

Страница: 18 / 60

Names of things and what they do

fig.Box-Front

1. MIC Connectors (channels 1–4)

These are balanced (XLR) mic input jacks. 48V phantom
power can be supplied via these jacks, allowing you to connect
phantom powered condenser mics.

* You may connect either balanced or unbalanced sources.

* The MIC connectors are wired as follows. Check how your audio

equipment is wired before you connect it.

fig.02-XLR-e

2. LINE IN Jacks (channels 1–4)

These are 1/4” TRS balanced line input jacks.

* You can also connect standard (unbalanced) 1/4” plugs to these

jacks.

You can’t use the MIC connector and LINE IN jack of the same
channel simultaneously. Connect only one or the other.

3. Hi-Z Switches (channels 1, 2)

When one of these is switched on (

), the corresponding

LINE IN jack becomes a high-impedance jack, allowing an
electric guitar to be connected directly.

4. PHANTOM Switch

If you turn this switch on (

), phantom power will be

supplied to the MIC connectors (1–4).

You must leave phantom power turned off unless you’ve
connected a condenser mic that requires a phantom power
supply. Supplying phantom power to a dynamic mic or an
audio playback device will cause malfunctions.

For details on the specifications for your mic, refer to the
instruction manual that came with the mic you’re using.

* The M-16DX’s phantom power:

(per channel) DC 48 V, 5 mA Max

* You can specify whether phantom power will be supplied to all

MIC connectors or just to MIC connectors 3–4.

➝

“Specifying the channels to which phantom power is
supplied (Phantom)” (p. 45)

DIGITAL IN Jack/Connector (channels 11/12)

These connectors accept the input of digital signals. Both
optical and coaxial-type connectors are provided.

If you press the mix controller’s DIGITAL button so it’s lit, the
digital signal will be input to channels 11/12.

* You can’t use the optical and coaxial inputs simultaneously. The

M-16DX will use the first signal that it detects after you pressed
the DIGITAL button.

* When inputting a digital signal, the sampling frequency of the

input signal must match the sample rate of the M-16DX.

➝

“Specifying the M-16DX’s sampling frequency (Sample
Freq)” (p. 45)

I/O module

Front panel

GND (SLEEVE)

COLD (RING)

HOT

(TIP)

Содержание Edirol M-16DX





























































Результаты поиска

Содержание Edirol M-16DX

Отзывы:

Похожие инструкции для Edirol M-16DX

Бренды по названию

Популярные бренды

Roland Edirol M-16DX, Руководство пользователя

Результаты поиска

Содержание Edirol M-16DX

Отзывы:

Похожие инструкции для Edirol M-16DX

Бренды по названию

Популярные бренды