Chapter 4 Performing Cutting
4-2 Preparation for and Performing Cutting
Chapter 4 Performing Cutting
71
Names of Jigs
Main Clamp
Sub Clamp
Main Clamp
*
Cap*
Spacer
Sub Clamp
Clamp for Block Workpiece (The height of a workpiece to be used is displayed
on the surface of the clamp.)
C-1
For 12 to 16/ 18 to
22mm
C-2
For 12 to 16/ 18 to
22mm
D-1
For 24 to 26mm
D-2
For 24 to 26mm
*NOTE: The modeling machine is shipped from the factory with the sub clamp installed on the main clamp.
Sub Clamp Selection
Select the sub clamp in accordance with the type and size of the workpiece you want to use. Use an appropri-
ate sub clamp with “
” in the table below.
Type of Work-
piece (shape)
Size of Workpiece
(mm)
Sub-clamp
Cap
Spacer
Clamp for block
External diameter/ width ×
depth
Height
C-1,C-2
D-1,D-2
Disc with-
out levels
diameter 98 to 100
10 to 14
Disc with
levels
Level section: diameter 98 to 100
Body section: diameter 95
12 to 26
Block
40 x 75
12 to 16
18 to 22
24 to 26