Chapter 3 Basic Operation
59
Chapter 3 Basic Operation
Chapter 3 Basic Operation
3-4 Pausing and Quitting Cutting
Pausing and Resuming Operation
This operation pauses cutting. You perform it using the built-in panel. This also makes it possible to resume cut-
ting at the paused position after an operation such as moving the tool to check the status of the workpiece.
Procedure
Press the PAUSE button during cutting.
Tool movement pauses. The PAUSE light comes on
and the READY light flashes. Rotation of the spindle
does not stop at this time.
Press the VIEW button.
Rotation of the spindle stops, the table moves to
the front of the machine (the VIEW position). The
READY light flashes while the tool and table are
moving.
This operation cannot be performed while a front
cover is open. Close the front cover, then perform
the operation.
