Chapter 2 Installation and Setup
Chapter 2 Installation and Setup
2-5 Connecting Multiple Units
Chapter 2 Installation and Setup
Select a machine to use
Up to four machines can be connected to a single computer but parallel use is unavailable. So select a ma-
chine to use.
Procedure
Go to [Start Menu], and click [All Programs] (or [Program]) - [Roland VPanel for DWX-
30] - [VPanel].
The [Printer Select] window appears
Select a machine to use.
If the machine name is not changed, "DWX-30
(Copy 1)" is displayed. (The third machine is dis-
played as "DWX-30 (Copy 2).")
Click [OK].
The VPanel program starts.
To change a machine to use
Quit VPanel. Then repeat the steps
and
to select a machine to change.
To change the name of the machine which has been set, change the name of the installed
printer (the machine you are using).
Windows 7: From [Start] menu, click [Control Panel]
[Hardware and Sound]
[Devices and
Printers].
Windows Vista: From [Start] menu, click [Control Panel]
[Hardware and Sound]
[Printers].
Windows XP: From [Start] menu, click [Control Panel]
[Printers and Other Hardware]
[Print-
ers and Faxes].
Select the name of driver of the machine (Printer) you are using, and change the name.
Restart VPanel.
The name which has been changed appears on the top window.
47
