1-2 Part Names and Functions
Chapter 1 Getting Started
Chapter 1 Getting Started
30
Handy Panel and Built-in Panel
You operate this machine using either the handy panel connected to the cutting machine by a cable, or the
machine's built-in panel.
Status Indicated by the LEDs for the Built-in Panel
Name
LED state
Machine status
POWER
Lighted
The main power is on.
Dark
The main power is off.
READY
Lighted
The sub power is on.
Flashing
Initializing.
The front cover is open.
Tool movement is in progress.
The spindle is rotating.
Cutting is in progress.
During stopping cutting
Note: When the cutting data is sent during initialization
and stopping cutting from the computer, the machine
accepts no cutting data.
Dark
The sub power is off.
ERROR
Flashing slowly
A warning (nonfatal error) has occurred. (A description
of the error is displayed in VPanel.)
Flashing rapidly
An error resulting in an emergency stop has occurred. (A
description of the error is displayed in VPanel.)
PAUSE
( n e x t t o t h e
PAUSE button)
Lighted
Operation is paused.
LEDs
Built-in panel
LEDs
Dial
Operation
buttons
Sub power button
P. 50, "How to Start
the Machine"
PAUSE button
P. 59, "Pausing and
Quitting Cutting"
VIEW button
P. 57, "Moving to the
VIEW Position"
Handy panel
P. 62, "Using the Handy Panel"
CANCEL button
P. 61, "Quitting Cut-
ting"
