Roland Duo - capture EX EX, Руководство пользователя

Страница: 7 / 48

Introduction
7
2
[SENS 1] knob, [SENS 2] knob
Adjust the volume of the audio signal that is input via the INPUT 1 jack and the INPUT 2 jack.
3
PEAK indicator
Lights up when the input signal level is too high. Use the [SENS 1] knob and the [SENS 2] knob to
adjust the input level so that the PEAK indicator does not light.
4
[OUTPUT] knob
Adjusts the volume that is output from the PHONES jack, OUTPUT L jack, and OUTPUT R jack.
5
PHONES jack
Used to connect headphones. This jack will output the same sound as the OUTPUT L and OUTPUT
R jacks. Even if headphones are connected, sound will be output from the OUTPUT L and OUTPUT
R jacks.
6
Power indicator ( )
Lights up while the DUO-CAPTURE EX’s power is on (p. 9).
Power.indicator.color Supplied.power
Green
Bus power or optional AC adaptor
Red Batteries
MEMO
• When operating this unit using batteries, the power indicator will blink when the batteries only
have enough power left for five or fewer minutes of operation. Replace the batteries as soon as
possible.
• When using the optional AC adaptor, the DUO-CAPTURE EX will automatically be switched off
after 10 consecutive hours of no communication with the computer. The power indicator will
blink 5 minutes before the unit switches off automatically. After the unit switches off, turn the
power on if you want to use the DUO-CAPTURE EX again.