Roland DP603, Руководство пользователя

Страница: 19 / 34

17
Advanced Operation
Saving a Registration Set (Registration Export)
You can save all registrations held in registration memory into a
registration set on a USB flash drive.
1.
Connect your USB flash drive to the USB Memory port
(p. 7).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [
K
] [
J
] buttons to select “Registration Export,” and
then press the [
s
] (Enter) button.
The Registration Export screen appears.
4.
Rename the registration set.
[
K
] [
J
] buttons
Select the position at which you want to change
the character.
[–] [+] buttons
Change the character.
If you decide to cancel, press the [
u
] (Exit) button.
5.
Press the [
s
] (Enter) button.
The settings are saved.
NOTE
Never turn off the power while the screen indicates “Executing...”
6.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Loading a Saved Registration Set (Registration
Import)
Here’s how a registration set that’s saved on a USB flash drive can be
loaded into the [Registration] button.
NOTE
When you load a registration set, the registrations that were
saved in the [Registration] button are overwritten and lost. If you
don’t want to lose these registrations, save them to a USB flash
drive.
1.
Connect your USB flash drive to the USB Memory port
(p. 7).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [
K
] [
J
] buttons to select “Registration Import,” and
then press the [
s
] (Enter) button.
The Registration Import screen appears.
4.
Use the [–] [+] buttons to select the registration set that
you want to load.
5.
Press the [
s
] (Enter) button.
A confirmation message appears.
If you decide to cancel, press the [
u
] (Exit) button.
6.
Use the [
J
] button to select “Yes,” and then press the [
s
]
(Enter) button.
The settings are loaded.
NOTE
Never turn off the power while the screen indicates “Executing...”
7.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.