Roland DP-990F, Руководство пользователя

Страница: 56 / 87

57
Various Settings
When you turn on the power, the left pedal functions as the
soft pedal, and the center pedal functions as the sostenuto
pedal (p. 20). You can change the function of the pedal to a
variety of other operations.
* “Lyr (Layer)” and “Oct (Octave)” cannot be specified
simultaneously for the center and left pedals.
Some of the internal songs have a tempo that varies during
the song.
If desired, you can make these songs play at a fixed tempo.
fig.d-EQ-Param.eps
* If Tempo Mute is turned on, the tempo indication in the
screen will be highlighted.
Ordinarily, when playing back SMF music files for Roland
Piano Digital instruments (p. 80), the left-hand part is
assigned to the [Left] button, and the right-hand part is
assigned to the [Right] button. However, right-hand and left-
hand part assignments in certain SMF music files may differ.
If these are set to “Auto,” and as a result you are unable to
use the track buttons to control the left- and right-hand
parts properly, change the setting to “2/1 Part” or “3/4 Part.”
* This setting can be used for SMF format songs other than the
internal preset songs. It will not affect internal preset songs.
After changing this setting, try selecting the song once
again.
If desired, you can specify that the sound of a track will play
at a reduced volume rather than going completely silent
when you press a track button and turn off its indicator.
This setting lets you play a specific part at a reduced volume
and use it as a “guide” for your playing.
When you turn off the power, the track mute volume will be
reset to “0.”
Changing How the Pedals Work
(Center/Left Pedal Function)
Function Description
Sostenuto
Sets function to Sostenuto pedal.
* Selectable only for the center pedal.
Soft pedal
Sets function to soft pedal.
* Selectable only for the left pedal.
Start/stop
The pedal will have the same function as the
[
] button.
Layer
Pressing the pedal will layer on Tone 2, used
for Dual play.
*The Layer function can be applied only when
using Dual play.
Octave
Pressing the pedal will layer on a sound one
octave higher.
* The Octave function cannot be applied
while using Twin Piano, Dual play, or Split
play.
Other Settings
Playing Back at a Fixed Tempo
(Tempo Mute)
Setting Description
On
Tempo changes recorded in the song will be ignored,
and the song will play at a fixed tempo.
OFF
The song will play according to the tempo changes it
contains.
Lit if Tempo Mute is enabled
Changing the Parts Assigned to the Track
Buttons During SMF Playback (Track Assign)
Setting Description
The part assigned to each track will be
determined automatically, depending on the
song file.
Assigns Part 1 to the [Right] button, Part 2 to
the [Left] button, and the remaining parts to
the [Accomp] button.
Assigns Part 4 to the [Right] button, Part 3 to
the [Left] button, and the remaining parts to
the [Accomp] button.
Using the Sound of a Specific Part as a
“Guide” (Mute Volume)
Setting Description
0 – 10 Increasing the value will make the sound louder.
DP990F_e.book 57 ページ ２０１０年１月１４日 木曜日 午後１１時２９分