Roland CG-8, Руководство пользователя

Страница: 55 / 132

55
About projects
3
Turn the [VALUE] dial to move the guide, and select the visual pad ([1]–[16]) to which
you want to assign the project.
The location of the project names shown in the screen correspond to the location of the
visual pads.
4
Use the [ PREV][NEXT ] buttons to select “ASSIGN PROJECT,” and press the
[ENTER] button.
The project select screen will appear.
5
Select a project.
fig.project-assign01.e.eps
6
Use the [ PREV][NEXT ] buttons to select “ASSIGN,” and press the [ENTER]
button.
You will return to the PROJECT EDITOR screen. The project you selected in step 5 will
be assigned to the visual pad you selected in step 3.
: Project
Indicates the size
and creation date
of the project.
Make your selection using the [ PREV][NEXT ] buttons,
then press the [ENTER] button to confirm your choice.
Cancel the operation and return to
the PROJECT EDITOR screen. Enter the folder
selected in the list.
Return to the next higher level.
Indicates the current level. List Turn the [VALUE] dial to select.
:Folder
You can’t directly select a
project from a
CompactFlash card. If you
want to use a project that’s
stored on a CompactFlash
card, you must first copy it
into the CG-8’s internal
hard disk, and then assign
it to a visual pad. For
details on how to copy a
project, refer to
“Managing projects and
pictures”
(p. 84).
If in step 3 you select a
visual pad to which a
project is already assigned,
the project assignment for
that pad will be
overwritten. (This only
changes the assignment for
that visual pad; the project
itself will not be
overwritten.)
CG8_e.book 55 ページ ２００５年４月２０日 水曜日 午後１２時３分