74
Convenient Functions for Playback
(continued)
If you don’t want sound to come from the speakers, press the [SPEAKER] button to turn
them off. The speakers can be turned back on by pressing the button once again.
fig.speaker.eps
The recorded song will play back with the left and right audio channels exchanged. This
can be used to conveniently place the recorded audio at a location that is convenient for
the listener.
For more about left and right panning, refer to the illustration on Page 121.
* The audio heard from the speakers will not be exchanged.
1
Press the [MENU] button to access the menu screen, and choose
“OUTPUT Exchange.”
fig.menu-limiter01.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “OUTPUT
Exchange.”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to turn the output exchange on/off.
fig.menu-limiter02-e.eps
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
Muting the Sound of the Speakers
Exchanging the Left and Right Audio Channels for Playback
Value
Explanation
Off (factory setting)
You'll hear the sound just as during recording.
On
The left and right audio channels will be exchanged relative to the recording.
When using the internal mics, you won’t hear any sound from the speakers when you’re
recording or are in recording-standby mode, even if you press the [SPEAKER] button to turn
them on (get them to produce sound). This is to prevent the internal mics (or the external
microphones) from picking up the sound emanating from the speakers, which would then
become part of your recordings.
When using the external microphones, you should turn the speakers on or off as necessary
depending on the circumstances.
Important
CD-2u_SD-2u_e.book 74 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
