Listening to a CD/Listening to an SD Memory Card
(continued)
71
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
fig.tansport-remote-e.eps
Remote operations
Song stop/play (pause)
Song cue, rewind/fast-forward
Adjusting the volume
Higher volume.
Lower volume.
The [VOLUME] knob of the CD-2u/SD-2u itself
does not move when you use the remote control to
adjust the volume. This will mean that the position
of the [VOLUME] knob may not match the actual
volume.
Note
If you press the [
] (Stop) button during playback, the CD-2u/SD-2u can remember
the position at which you paused, and will resume playback from that location the next
time you start playback. This is called the Resume function.
1
Press the [MENU] button to access the menu screen, and choose
“Resume.”
fig.menu-resume01-e.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “Resume.”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to turn the Resume function on/off.
fig.menu-resume02-e.eps
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
After pressing the [
] (Stop) button to halt playback, you can press the [
] (Play)
button to re-start playback from the location at which you stopped.
If after pressing the [
] (Stop) button to stop playback, you then press the [
] (Stop)
button or eject the SD memory card or CD, the Resume function, which had
remembered the location at which you stopped, will be cancelled.
Continuing Playback from When You Stopped a Song (Resume Function)
Value
Explanation
Off (factory setting)
The Resume function will be off.
On
The Resume function will be on. The CD-2u/SD-2u will
remember the position at which playback was stopped.
Operation When Resume is On
CD-2u_SD-2u_e.book 71 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
