Roland Camm-1 GR2-540, Руководство по установке

Страница: 21 / 39

19
1.Introduction
2. Included Items
The following items are included with the machine. Make sure they are all present and accounted
for.
Ethernet cable
(5 m [196.9 in.]; 1)
USB cable (2.5 m [98.4 in.];
1)
Cutting pad (1) Roll holder flanges (2)
Vertical stands (2) Stand beam (1)
Bottom stands with wheels
or cushions (2)
Roll holders (2)
Left and right roll holder
supports
(1 each)
Roll holder guide bushes
(4)
Cable tie (1) Safe blade (1)
M6 bolts* (22)
Hexagonal wrench (large)
(1)
Hexagonal wrench (small)
(1)
Tweezers (1)
Setup Guide (this docu -
ment; 1)
Items not included
Power cord (1) Blade holder (1) Blade (1) Pin (1)
* There are 2 spare bolts included with the 20 bolts used to assemble the stand and the machine.