Overall Settings (Menu)
10
Menu Parameter List
About the
MEMORY
MEMORY
mark
5
Can be set and saved for each memory by the “Saving to Memory” (p.
8) operation. If you do not perform this operation, the settings are lost
when you switch memories.
5
Can be set and saved for each memory if the preference (SWP/MEP/C1P/
C2P/EPP) is set to MEM (MEMORY). To save, refer to “Saving to Memory”
If set to SYS (SYSTEM), the settings common to the unit are used. Function
settings are saved automatically.
Parameter
Explanation
STR
(STRUCTURE)
Selects how the main distortion and the
booster are connected.
SER
(SERIES):
Connected in the order of
booster
&
main distortion.
PRL
(PARALLEL):
The booster and the main
distortion are connected in parallel.
Parameter
Explanation
SWF
(ON/OFF SWITCH
FUNCTION)
Specify the functions of the [ON/OFF]
switch, [MEMORY/BOOST] switch, and
footswitches connected to the CTL 1, 2/
EXP jack.
* The functions that can be assigned differ
depending on the switch.
oFF
:
No operation.
SW
(ON/OFF SWITCH)
:
Turns the effect on/off.
BST
(BOOST)
:
Turns the booster on/off.
MAn
(MANUAL)
:
Selects manual.
M-1
(MEMORY 1)
–
M-
g
(MEMORY 9):
Selects memory
1–9.
M10
(MEMORY 10)
–
M
gg
(MEMORY 99):
Selects
memory 10–99.
M.00
(MEMORY 100)
–
M.27
(MEMORY 127):
Selects
memory 100–127.
MUP
(MEMORY UP)
:
Increments the memory
number according to the MEMORY EXTENT
setting. Long-press the switch to turn the booster
on/off.
Mdn
(MEMORY DOWN)
:
Decrements the memory
number according to the MEMORY EXTENT
setting. Long-press the switch to turn the booster
on/off.
MUP.
(MEMORY UP, ON/OFF)
:
Increments the memory
number according to the MEMORY EXTENT
setting. Long-press the switch to turn the effect
on/off.
MDN.
(MEMORY DOWN, ON/OFF)
:
Decrements the
memory number according to the MEMORY
EXTENT setting. Long-press the switch to turn the
effect on/off.
MFC
(MEMORY SWITCH
FUNCTION)
C1F
(CTL1 FUNCTION)
C2F
(CTL2 FUNCTION)
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
Содержание BOSS OD-200
Страница 18: ......