Roland BK-5OR, Руководство пользователя

Страница: 92 / 134

Menu options
92
r
Backing Keyboard BK-5 OR
Rhythm Track Edit functions
The “Track Edit” level of the Rhythm Composer provides
12 functions: Quantize, Erase, Delete, Copy, Insert, Key,
Change Velo, Change Gate Time, Global Change, Shift
Clock, Track Length and Time Signat. There is also a
“Micro Edit” environment that allows you to add, delete
or change individual events. See page 103 for details.
1.
Return to the main Rhythm Composer page.
2.
Press the [MENU] button (its indicator
flashes).
The display changes to:
3.
Use the [CURSOR
÷
VALUE] dial to select
“Track Edit”, then press the [ENTER/SELECT]
button.
The display changes to:
You can use the [CURSOR
÷
VALUE] dial and [ENTER/
SELECT] button to edit the available functions.
■
Quantize
Use this function if you chose not to quantize your
music during recording and now realize that the tim-
ing is not quite what you expected it to be. If only
certain notes in a given time range need to be quan-
tized, you should narrow down the edit range using
the “From”/“To” parameters.
Parameter Setting Explanation
Track ADrums~Acc6,
ALL Allows you to select
the track you wish to
edit. You can also
select “ALL” here, in
which case the opera-
tion applies to all
tracks.
Mode Major, Minor,
7th Allows you to select
the Mode to be edited.
Division Intro 1~4,
Main 1~4, Fill
Dwn 1~3, Fill
Up 1~3, End
1~4 Use this parameter to
select the Division you
want to edit.
From Bar 1~[last mea-
sure of the
track or pat-
tern] Refers to the first mea-
sure to be edited. By
default, the “From”
value is set to the
beginning of the
selected track(s).
From Beat 1~[number of
beats per bar] Specifies the beat posi-
tion. The number of
selectable beats
depends on the
selected time signa-
ture.
From CPT 0~119 Refers to the starting
CPT position. “CPT” is
short for “Clock Pulse
Time”, the smallest unit
used by the BK-5 OR.
(There are 120 CPTs to
every beat of a 4/4
bar.) Change this set-
ting only if your edit
operation should start
after the selected beat.
To Bar 1~[last mea-
sure of the
track or pat-
tern] This is where you spec-
ify the last measure to
be edited. By default,
the “To” position is set
to the last event of the
selected track (or the
last event of the long-
est track when you
select “All”).
BK-5or_US.book Page 92 Monday, February 13, 2012 12:19 PM