Roland AX-EDGE, Руководство по параметрам

Страница: 68 / 72

MFX/IFX Parameters
68
70 FLANGER
0
DELAY
L in
R in
Balance D
Delay Delay
Balance D
L out
R out
Balance W
Balance W
Feedback
Balance D
Flanger Flanger
Balance D
Balance W
Balance W
Feedback
Parameter Value Explanation
Flg PreDly
(Flanger Pre Delay)
0.0–100 [msec]
Adjusts the delay time from when the
direct sound begins until the flanger
sound is heard.
Flg Sync
(Flanger Rate
(sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Flg Hz
(Flanger Rate (Hz))
0.05–10.00 [Hz]
Frequency of modulation
Flg Note
(Flanger Rate (note))
Note
& “Note”
(p. 72)
Flg Depth
(Flanger Depth)
0–127 Depth of modulation
Flg Fbk
(Flanger Feedback)
-98–+98 [%]
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Flg Bal
(Flanger Balance)
D100: 0W–D0:
100W
Volume balance between the direct
sound (D) and the flanger sound (W)
Dly Sync
(Delay Time
(sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Dly Msec
(Delay Time (msec))
1–2600 [msec]
Adjusts the delay time from the direct
sound until the delay sound is heard.
Dly Note
(Delay Time (note))
Note
& “Note”
(p. 72)
Dly Fbk
(Delay Feedback)
-98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the effect.
Negative (-) settings will invert the phase.
Dly HF
(Delay HF Damp)
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
2000, 2500, 3150,
4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which sound
fed back to the effect will be cut. If you do
not want to cut the high frequencies, set
this parameter to BYPASS.
Dly Bal
(Delay Balance)
D100: 0W–D0:
100W
Adjusts the volume balance between the
sound that is sent through the delay (W)
and the sound that is not sent through
the delay (D).
Level 0–127 Output Level
71 CHORUS
0
FLANGER
L out
R out
Balance D
Flanger Flanger
Balance D
Balance W
Balance W
Feedback
Balance D
Chorus Chorus
Balance W
Balance W
Balance D
L in
R in
Parameter Value Explanation
Cho PreDly
(Chorus Pre Delay)
0.0–100 [msec]
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Cho Sync
(Chorus Rate
(sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Tempo” (p. 8)
Cho Hz
(Chorus Rate (Hz))
0.05–10.00 [Hz]
Modulation frequency of the chorus
effect
Cho Note
(Chorus Rate (note))
Note
&
“Note” (p. 72)
Cho Depth
(Chorus Depth)
0–127 Modulation depth of the chorus effect
Cho Bal
(Chorus Balance)
D100: 0W–D0:
100W
Volume balance between the direct
sound (D) and the chorus sound (W)
Flg PreDly
(Flanger Pre Delay)
0.0–100 [msec]
Adjusts the delay time from when the
direct sound begins until the flanger
sound is heard.
Flg Sync
(Flanger Rate
(sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Flg Hz
(Flanger Rate (Hz))
0.05–10.00 [Hz]
Modulation frequency of the flanger
effect
Flg Note
(Flanger Rate (note))
Note
& “Note”
(p. 72)
Flg Depth
(Flanger Depth)
0–127 Modulation depth of the flanger effect
Flg Fbk
(Flanger Feedback)
-98–+98 [%]
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Flg Bal
(Flanger Balance)
D100: 0W–D0:
100W
Adjusts the volume balance between the
sound that is sent through the flanger
(W) and the sound that is not sent
through the flanger (D).
Level 0–127 Output Level
72 CE-1
(Chorus)
This models the classic BOSS CE-1 chorus effect unit. It provides a
chorus sound with a distinctively analog warmth.
L in L out
R out R in
CE-1 CE-1
2-Band EQ 2-Band EQ
2-Band EQ 2-Band EQ
Parameter Value Explanation
Intensity 0–127 Chorus depth
Low Gain -15–+15 [dB]
Amount of boost/cut for the low-
frequency range
High Gain
-15–+15 [dB]
Amount of boost/cut for the high-
frequency range
Level 0–127 Output Level