Roland AX-EDGE, Руководство по параметрам

Страница: 55 / 72

MFX/IFX Parameters
55
40 4TAP PAN DELAY
This effect has four delays.
R out
L out
Balance W
Balance W
Balance D
Balance D
L in
Quadruple
Tap Delay
Quadruple
Tap Delay
R in
Delay 1
Feedback
Delay 2
Delay 3
Delay 4
1
L
2 3
4
R
Parameter Value Explanation
Dly 1 Sync
(Delay 1
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Tempo” (p. 8)
Dly 1 Msec
(Delay 1 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 1 sounds is heard.
Dly 1 Note
(Delay 1 Time (note))
Note
&
“Note” (p. 72)
Dly 2 Sync
(Delay 2
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Tempo”
(p. 8)
Dly 2 Msec
(Delay 2 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 2 sounds is heard.
Dly 2 Note
(Delay 2 Time (note))
Note
&
“Note” (p. 72)
Dly 3 Sync
(Delay 3
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
& “Tempo”
(p. 8)
Dly 3 Msec
(Delay 3 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 3 sounds is heard.
Dly 3 Note
(Delay 3 Time (note))
Note
&
“Note” (p. 72)
Dly 4 Sync
(Delay 4
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Dly 4 Msec
(Delay 4 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 4 sounds is heard.
Dly 4 Note
(Delay 4 Time (note))
Note
&
“Note” (p. 72)
Dly 1 Fbk
(Delay 1 Feedback)
-98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the effect.
Negative (-) settings will invert the phase.
HF Damp
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
2000, 2500, 3150,
4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter to
BYPASS.
Dly 1 Level
(Delay 1 Level)
0–127 Volume of each delay
Dly 2 Level
(Delay 2 Level)
Dly 3 Level
(Delay 3 Level)
Dly 4 Level
(Delay 4 Level)
Low Gain
-15–+15 [dB]
Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB]
Amount of boost/cut for the high-
frequency range
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
41 MULTI TAP DELAY
This effect provides four delays. Each of the Delay Time parameters
can be set to a note length based on the selected tempo. You can
also set the panning and level of each delay sound.
R out
L out
Balance W
Balance W
Balance D
L in
Multi Tap
Delay
Multi Tap
Delay
2-Band EQ 2-Band EQ
2-Band EQ 2-Band EQ
Balance D
Delay 1
Feedback
Delay 2
Delay 3
Delay 4
R in
Parameter Value Explanation
Dly 1 Sync
(Delay 1
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Dly 1 Msec
(Delay 1 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 1 sounds is heard.
Dly 1 Note
(Delay 1 Time (note))
Note
&
“Note” (p. 72)
Dly 2 Sync
(Delay 2
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Dly 2 Msec
(Delay 2 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 2 sounds is heard.
Dly 2 Note
(Delay 2 Time (note))
Note
& “Note” (p. 72)
Dly 3 Sync
(Delay 3
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Dly 3 Msec
(Delay 3 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 3 sounds is heard.
Dly 3 Note
(Delay 3 Time (note))
Note
& “Note”
(p. 72)
Dly 4 Sync
(Delay 4
Time (sync switch))
OFF, ON
If this is ON, the rate synchronizes with
the tempo of the rhythm.
&
“Tempo” (p. 8)
Dly 4 Msec
(Delay 4 Time (msec))
1–2600 [msec]
Adjusts the time from the original sound
until delay 4 sounds is heard.
Dly 4 Note
(Delay 4 Time (note))
Note
& “Note”
(p. 72)
Dly 1 Fbk
(Delay 1 Feedback)
-98–+98 [%]
Adjusts the proportion of the delay sound
that is fed back into the effect.
Negative (-) settings will invert the phase.
HF Damp
200, 250, 315, 400,
500, 630, 800,
1000, 1250, 1600,
2000, 2500, 3150,
4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter to
BYPASS.
Dly 1 Pan
(Delay 1 Pan)
L64–63R Stereo location of Delays 1–4
Dly 2 Pan
(Delay 2 Pan)
Dly 3 Pan
(Delay 3 Pan)
Dly 4 Pan
(Delay 4 Pan)
Dly 1 Level
(Delay 1 Level)
0–127 Volume of each delay
Dly 2 Level
(Delay 2 Level)
Dly 3 Level
(Delay 3 Level)
Dly 4 Level
(Delay 4 Level)
Low Gain -15–+15 [dB]
Amount of boost/cut for the low-
frequency range
High Gain
-15–+15 [dB]
Amount of boost/cut for the high-
frequency range
Balance
D100: 0W–D0:
100W
Volume balance between the direct
sound (D) and the effect sound (W)
Level 0–127 Output Level