Roland AT900 Music Atelier страница 78 Скачать руководство пользователя

Страница: 78 / 300

Selecting and Playing Sounds

You can use the Lower keyboard to play various drum sounds (drum set). In
this case, the Lower voices will no longer sound.

fig.01-32_AT-900.eps

Press the [Drums/SFX] button, getting its indicator to light
up.

The [Drums/SFX] button indicator will alternate between on (lit) and off (dark)
each time it is pressed.

The Drums/SFX (drums/sound effects) screen will be displayed for several
seconds.

fig.01-33-1.eps

Play the Lower keyboard and listen to the various drum
sounds on each key.

Playing Drum Sounds or Sound Effects from the Entire Lower
Keyboard (Drums/SFX)

Refer to “Drum Set List” for
details on which drum sound or
Sound Effect will be played by
each note.

NOTE

It is not possible to select and
play both [Drums/SFX] and
[Manual Perc] buttons
simultaneously.

NOTE

For some drum sets, there will
be keys that do not sound.

AT-900_e.book 76 ページ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Результаты поиска

Содержание AT900 Music Atelier

Отзывы:

Похожие инструкции для AT900 Music Atelier

Бренды по названию

Популярные бренды

Roland AT900 Music Atelier, Руководство пользователя

Результаты поиска

Содержание AT900 Music Atelier

Отзывы:

Похожие инструкции для AT900 Music Atelier

Бренды по названию

Популярные бренды