manualshive.com logo in svg

Roland AT900 Music Atelier, Руководство пользователя, Страница: 270 / 300

Поделиться
Скачать
Roland AT900 Music Atelier Скачать руководство пользователя страница 270

 

268

 

Enjoying Music and Video

 

You can connect a CD drive to the ATELIER and use it to play music CDs. This 
lets you perform or sing along with the backing of a music CD.

 

1.

 

Connect a commercially available CD drive to the Ext Drive 
connector, and insert the music CD into the CD drive.

 

2.

 

Press the [Song] button.

 

The Song Select screen appears.

 

3.

 

Touch <

><

> to select the “CD.”

 

4.

 

Touch <

><

> to select the song you want to play.

 

5.

 

Touch <

> (

) to start playing back the song.

 

6.

 

Touch <

> (

) to stop playing back the song.

 

Listening to Songs from Music CD

NOTE

You can’t copy music CD songs 
to “Favorites.”

NOTE

It will take a certain amount of 
time until a music CD can be 
selected.

NOTE

You can also play or stop the 
music data by touching <Play> 
or <Stop> in the Rec/Play 
screen, and you can touch 
<Bwd> or <Fwd> to rewind or 
fast-forward the playback.

AT-900_e.book 268 ページ ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Отзывы:

Нет отзывов