manualshive.com logo in svg

Roland AT900 Music Atelier, Руководство пользователя, Страница: 197 / 300

Поделиться
Скачать
Roland AT900 Music Atelier Скачать руководство пользователя страница 197

 

195

 

Editing Your Musical Performance Data

 

Editing Your Musical Performance Data

 

This function lets you copy a portion of recorded song to a 
different measure (bar) location in the same track.
If a recording already exists at the copy destination, it will be 
erased.
Example: To copy measures (bars) 5–7 to measure (bar) 8

 

fig.08-13.eps

 

1.

 

Touch <Rec/Play> on the Main screen.

 

The Rec/Play screen appears.

 

fig.08-02.eps

 

2.

 

In the Rec/Play screen, touch <

> (Utility) to 

open the Utility screen.

 

fig.08-03.eps

 

3.

 

In the Utility screen, touch <Edit>.

 

The Edit Menu screen appears.

 

fig.08-08-a.eps

 

4.

 

Touch <Copy>.

 

fig.08-14-2.eps

 

The Copy screen appears.

 

fig.08-14.eps

 

5.

 

Touch the “Track” value (the track to be 
copied).

 

6.

 

Touch <

><

> to set “Track” (the track to 

be copied).

 

fig.08-15-2.eps

 

If you select “ALL,” the recording in all the tracks will be 
copied.

 

7.

 

When you’re done making the settings, touch 
<Exit>.

 

8.

 

Touch the “From” value (the measure at which 
copying will begin).

 

Copying Measures (Copy)

1

2

3

4

5

6

7

1

2

3

4

5

6

7

8

9

10

 

Track

ALL, RHYTHM, ACCOMP, BASS, LOWER, UPPER, 
SOLO, CONTROL

AT-900_e.book 195 ページ ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Отзывы:

Нет отзывов