manualshive.com logo in svg

Roland AT900 Music Atelier, Руководство пользователя, Страница: 129 / 300

Поделиться
Скачать
Roland AT900 Music Atelier Скачать руководство пользователя страница 129

 

127

 

Using the Registration Buttons

 

Using the Registration Buttons

 

Registrations from USB memory or floppy disk can be copied to user memory.

If a registration saved in USB memory or on a floppy disk is stored in user 
memory, the stored registration data will not disappear even when you turn 
off the power. It is convenient to load frequently-used registration into User 
memory.

Registrations saved in user memory can also be copied to USB memory (p. 
129).

 

Copying Registration from USB Memory to User 

 

Memory

 

1.

 

Connect the USB memory to the external memory 
connector.

 

2.

 

Touch <Registration> on the Main screen.

 

The Registration Load screen appears.

 

fig.03-05.eps

 

3.

 

Touch <File>.

 

The Registration File Edit screen appears.

 

fig.03-25.eps

 

Copying Registrations

If you want to copy registration 
from floppy disk, connect the 
floppy disk drive to the Ext 
Drive connector.

AT-900_e.book 127 ページ ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Отзывы:

Нет отзывов