Roland AT900 Music Atelier Скачать руководство пользователя страница 204

Страница: 204 / 300

202

Creating Original Accompaniment Rhythms

Independent “Drum Set,” “Beat,” and “Volume” settings can
be made for each Division.

Bring up the Rhythm Customize screen (p.
199).

fig.RC-10.eps

Touch <

> (Utility).

The Utility screen appears.

fig.RC-11.eps

Touch <Div Options> (Division Options).

The Division Options screen appears.

fig.RC-12.eps

Changing the Drum Set

Touch the value set for Drum Set.

fig.RC-12-1.eps

Touch <

> to change the setting.

Touch <Exit>.

The Division Options screen reappears.

Changing the Beat

Touch the Beat setting.

fig.RC-12-2.eps

Touch <

> to change the setting.

Touch <Exit>.

The Division Options screen reappears.

Changing the Volume

10.

Touch the Volume setting.

fig.RC-12-3.eps

Making the Division Settings

AT-900_e.book 202 ページ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Результаты поиска

Содержание AT900 Music Atelier

Отзывы:

Roland AT900 Music Atelier, Руководство пользователя, Страница: 204 / 300

Результаты поиска

Содержание AT900 Music Atelier

Отзывы: