Roland AT900 Music Atelier Скачать руководство пользователя страница 154

Страница: 154 / 300

152

Applying Various Effects to the Sound

You can specify the reverb depth for each part.

To adjust the reverb depth for Upper/

Lower/Pedal/Solo

Touch <Sound/KBD> on the Main screen.

fig.05-08.eps

The Sound/Keyboard screen appears.

fig.VoiceList.eps

Touch <Upper>, <Lower>, or <Pedal>.

The Upper Keyboard screen, Lower Keyboard screen, or
Pedalboard screen will be displayed.

fig.05-17.eps

fig.05-17_50

fig.05-15-3.eps

Touch <

> to display the Reverb Depth.

Touch the part whose reverb depth you wish
to adjust.

The following screen appears.

fig.05-20.eps

Touch <

> to adjust the setting.

Touch <Exit>.

Changing the Depth of the Reverb

Setting

0–10

AT-900_e.book 152 ページ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Результаты поиска

Содержание AT900 Music Atelier

Отзывы:

Roland AT900 Music Atelier, Руководство пользователя, Страница: 154 / 300

Результаты поиска

Содержание AT900 Music Atelier

Отзывы: