Roland AT900 Music Atelier Скачать руководство пользователя страница 117

Страница: 117 / 300

115

Using the Registration Buttons

Touch <OK>.

Saving of the registration data will begin.

When saving ends, the “- - - - -” in the screen will change to the registration
name that you saved.

If you’ve named the registration, it will be saved with that name.

If the following screen appears

If you select a number at which a registration has already been saved and
touch <Save>, the following screen appears.

fig.E-63.eps

If you wish to update the contents of the Registration data

Touch <OK>.

If you wish to save new data instead of updating the registration

Touch <Cancel>.

Rewriting of the Registration will be canceled.

In the Registration Save screen, select the number that is
displayed as “-----” (a number that currently does not
contain registration data).

Save the Registration (p. 113).

When saving is complete, the saved registration name will be displayed.

AT-900_e.book 115 ページ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Результаты поиска

Содержание AT900 Music Atelier

Отзывы:

Roland AT900 Music Atelier, Руководство пользователя, Страница: 117 / 300

Результаты поиска

Содержание AT900 Music Atelier

Отзывы: