Roland AT900 Music Atelier Скачать руководство пользователя страница 100

Страница: 100 / 300

Using Rhythm Performance

Touch <File Edit>.

The Rhythm File Edit screen appears.

Touch <Copy> (Rhythm Copy).

The Rhythm File Copy screen appears.

Touch <

> <

> to select the media (the location of the

rhythm you want to copy).

If you want to copy a rhythm from USB memory, select “Ext Memory.”
If you want to copy a rhythm from floppy disk, select “Disk.”

Touch <

> to select the rhythm you want to copy.

Touch User <

> to select the copy-destination

number.

Numbers for which a rhythm name is shown already have a rhythm saved to
them.

AT-900_e.book 98 ページ２００７年９月７日　金曜日　午前８時４３分

Содержание AT900 Music Atelier













































































































































































































































































































Результаты поиска

Содержание AT900 Music Atelier

Отзывы:

Roland AT900 Music Atelier, Руководство пользователя, Страница: 100 / 300

Результаты поиска

Содержание AT900 Music Atelier

Отзывы: