Roland Aerophone Go, Руководство пользователя

Страница: 7 / 16

7
1
Set the [TONE] knob to the “SETTING”
position.
You’re in settings mode.
* When you play in settings mode, you hear the
tone that you were previously playing.
2
Press the side key that corresponds to the item that
you want to set.
A “beep” is heard for a number of times corresponding to the
current value of the setting.
3
Use the octave keys to specify the value of the
setting.
A “beep” is heard for a number of times corresponding to the
specified value.
* The value that you specify is saved automatically. Even if you
turn off the power, the setting is remembered the next time
that you turn on the power.
4
Turn the [TONE] knob to exit settings mode.
Changing the Settings
You can specify how the sound is affected by the force of your breath (Breath Curve), the depth of reverberation (Reverb Level), and the type of
fingering (Fingering Type).
Setting
Side
keys
Value Explanation
Breath Curve “C3”
1 L2
Specifies how the sound responds to the force of your breath.
L2, L1
We recommend these settings if you’re a beginning wind
instrument player, or if you’re not confident of your lung
capacity. Fortissimo (ff) can be produced even by blowing
relatively softly.
M
This setting is the closest to the response of an actual wind
instrument.
H1, H2
We recommend these settings for sax players. Fortissimo (ff)
is produced only when you blow quite strongly.
2
L1
3
M
4
H1
5 H2
Reverb Level “Tc”
1
OFF
Adjusts the depth of reverb (the reverberation that is characteristic of a performance in a concert hall).
Higher values produce deeper reverberation; lower values produce shallower reverberation.
2 1
3 2
4 3
5 4
Fingering Type “Ta”
1 Sax
Switches the fingering setting.
&
For details on fingering, refer to “Fingering Chart” at the end of this manual.
Sax Sax fingering
Recorder
Recorder fingering
This uses standard recorder fingering, with the pitch range expanded by the table key.
With this fingering, the side keys are disabled so that the note does not change even if
you inadvertently press the left or right side key.
E-Wind
Electronic wind instrument fingering
The same “C D E F G A B C” fingering as a standard sax or recorder, with key combinations
that raise/lower the pitch by a semitone.
1, 2, 3, 4, 5, 6, C The same “C D E F G A B C” fingering as a standard sax or recorder
Tc, G#, C# Raise by a semitone
Ta, Tf, Eb, B Lower by a semitone
Bb
Lower by a whole tone
&
Refer to “Pressing the Performance Keys” (p. 6).
2
Recorder
3 E-Wind
MEMO
You can use the dedicated app to edit the settings of the Aerophone GO from your smartphone or tablet.
&
Refer to “Using the Aerophone GO with the Smartphone” (p. 8).
Breath force
Volume
M
H1
H2
L1
L2
Returning to the Factory Settings (Factory
Reset)
Here’s how to return the Aerophone GO to its factory-set state.
* Be aware that when you execute a factory reset, all previously
stored settings are lost.
1
With the [
L
] switch in the “OFF” position, turn the
[TONE] knob to the “SETTING” position.
2
While holding down both of the octave keys “UP”
and “DOWN,” turn the [
L
] switch “ON.”
A series of short “beeps” is heard, asking you to confirm the
operation.
3
Press the thumb button.
A long “beep” is heard, and the settings return to the factory-set
state.
4
Turn the power off, and then on again.
This completes the factory reset.