Roland A-88 Скачать руководство пользователя страница 13

Страница: 13 / 64

Contents of the Package

After you open the package, please check that all items are present.
(If any accessories are missing, please contact the place of purchase.)

☐

A-88

☐

AC Adaptor

This is the dedicated AC adaptor for the

A-88.
(includes an AC cord)

☐

USB cable

Use this cable to connect the A-88 to the USB connector of your computer.

☐

Damper pedal

This is the dedicated damper pedal for the A-88.

☐

A-Series Keyboard CD-ROM

This contains the USB driver and PDF files of the owner’s manual.

☐

Cakewalk SONAR LE DVD-ROM

Windows

DAW software allows you to record or play audio data on a computer.
For details on using SONAR LE, user registration, and obtaining a registration code, refer to the

installation guide (included on the DVD-ROM), or to the Help function of the software.

* Avoid touching or scratching the shiny underside (encoded surface) of a disc. Damaged or

dirty discs may not be read properly. Use a commercially available CD-ROM/DVD-ROM cleaner

to keep your disc clean.

* You need DAW software for Mac OS X.

☐

Cakewalk SONAR LE installation guide

Windows

This explains the installation and user registration process for the software included on

the Cakewalk SONAR LE DVD-ROM. Unless you complete the user registration and obtain a

registration code as directed in this guide, you won’t be able to use the software for more than

thirty days after installation.

☑

Owner’s Manual

This is the document you’re reading. Keep it at hand for reference when needed.

Please use only the included AC adaptor, USB cable

and damper pedal. If you require a replacement due

to loss or damage, please contact the nearest Roland

Service Center, or an authorized Roland distributor, as

listed on the “Information” page.

Содержание A-88

































































Результаты поиска

Содержание A-88

Отзывы:

Похожие инструкции для A-88

Бренды по названию

Популярные бренды

Roland A-88, Руководство пользователя

Результаты поиска

Содержание A-88

Отзывы:

Похожие инструкции для A-88

Бренды по названию

Популярные бренды