ROIDMI Cordless Vacuum Cleaner S1 Special FAQ
Q1:Vacuum cleaner won't turn on by pressing the power button.
A1:To start the vacuum, you need to press and hold the power button for more than 2 seconds to start.
B1:The vacuum cannot be started due to insufficient battery life. Please recharge and try after the charging is complete.
Q2:Vacuum cleaner won't turn off by pressing the power button
A2:Press and hold the power button for 1-2 seconds to turn off.
Q3:In which scenarios are each accessory used?
A3:Soft velvet roller brush in the power head: suitable for cleaning hard floors such as; floor tile, laminate, vinyl and hardwood floors in homes.
Two-in-one multi-function brush: Multi-function brush is suitable for cleaning all kinds of dust such as; upholstry, furniture, and electronics.
Removing the brush creates a crecice tool, suitable for cleaning narrow places such as; doors and windows sills, dead corners of stairs, sofa
gaps and more.
Q4:How long does it take to fully charge?
A4:Under normal use, it takes about 2.5 hours to fully charge.
Q5:How long can the vacuum operate after being fully charged?
A5:The vacuum cleaner S1 Special uses 8 x 2200mAh 18650 lithium batteries. In enhanced power mode, the run time is up to 10 minutes iand in
standard power mode, the run time us up to 50 minutes. Operating time can vary in different usage environments and years of use.
Q6:What is the standby time after being fully charged?
A6：The vacuum cleaner S1 Special draws a low power consumption. After being fully charged, it can still start after being left for more than six
months.
Q7:Adapter working voltage range?
A7:The adapter uses a wide voltage range and can be used worldwide. Since the plugs are different in different countries, please purchase
according to your needs, or you can buy plug accessories separately.
Q8:The charging head doesn't plug into the vacuum cleaner?
A8:The charger is specially developed for this vacuum. In order to prevent damage due to incorrect insertion, the charging plug has a unique
shape. It is recommended that you observe the orientation of the charging plug and the charging port on the vacuum and insert it after lining
up the plug and port.
