5. Make sure the gray dot on the food
chute points to close sign on the
base.
6. Reverse the step carefully when
disassembling.
As shown below, the Food Chute edge must point to “close” sign on the base in
order for the machine to operate.
WARNING: Make sure all parts are securely in place before operation. Do not
operate without food.
NOTE:
Under the bowl, there is a silicon pad that
prevents juice from exiting through the pulp
ejector. When using the Slow Juicer, make sure
the silicon pad is firmly in place. You may slide
the pad out when cleaning.
OPERATION
1. Once all parts are securely in place, connect the power cord to an approved power
source.
2. Place the pulp container under the pulp ejection and a glass under the spout for
juice.
3. The Slow Juicer has three settings:
ON – This starts the motor for juicing.
OFF – This stops the operation.
REV – This moves the auger in the opposite
direction.
4
