Rohm KZS-P, Перевод оригинального руководства по эксплуатации

Страница: 22 / 43

5 | Assembly of the Centric Clamp
22 / 43 KZS-P_KZS-PG
Work on and with the centric clamp may only be carried out by qualified oper-
ating and specialist personnel (see
Qualification of Operating and Special-
ist Personnel [
}
11] ).
5.2 Basic Principles
5.2.1 Connection Types
The centric clamp can either be connected directly, e.g. via a pallet (direct
connection) or via pipelines.
Direct connection
In the case of direct connection, the centric clamp is supplied with pressure
medium via the connections on the underside.
When using sealing air via a direct connection, the connection (5) must
be disassembled and the borehole closed with the threaded pin (35).
1
2
3
4
1 Pressure connection close 3 Connection for sealing air
2 Pressure connection open 4 Connections for central lubrication*
*both connections must be connected.